The swing diameter (swing) of your lathe can be found by measuring the swing radius – as indicated in the picture above – and doubling it. So it is double the distance between the spindle centre and the lathe bed. Its the diameter of the largest thing you can turn.
Please note: All lathes may not be included in the data below.
Most importantly the lathe should have a gap between the ways of your lathe bed and the swing diameter should be 300mm or above. Some customers have had lathes which have been mounted on worktops and have been able to use our steady rests with slight modifications to the fixing mechanism. If you do not find the information in the table below, please contact us via email: ken@kengarner.co.uk
| Axminster model number |
Swing (mm) |
Can I use the TriSpin? |
| AW1416VS |
350 |
Yes, with included spacer |
| AWSL |
240 |
please email |
| AWVSL |
240 |
please email |
| AWVSL1000 |
350 |
Yes, with included spacer |
| AWVSL900 |
300 |
Yes |
| AWVSWL1200 |
450 |
Yes, but additional spacer required |
| Jet model number |
Swing (mm) |
Can I use the TriSpin? |
| 3520B |
500 |
Yes, but additional spacer required |
| JML-1014 |
250 |
please email |
| JWL-1220 |
305 |
Yes |
| JWL-1220VS |
305 |
Yes |
| JWL-1442 |
355 |
Yes, with included spacer |
| JWL-1642 |
400 |
Yes, with included spacers |
| Record Model Number |
Swing (mm) |
Can I use the TriSpin? |
| DML 365H-CAM |
230 |
No, please email |
| DML 305 |
305 |
Yes |
| CL3-CAM |
305 |
Yes |
| CL4-CAM |
305 |
Yes |
| 24148-PK/WIN |
400 |
Yes, with included spacers |
| 55178-PK/WIN |
400 |
Yes, with included spacers |
| MAXI-1 |
533 |
Yes, with a spacer NOT included |
| MAXI-2 |
533 |
Yes, with a spacer NOT included |
| SIP Model Number |
Swing (mm) |
Can I use the TriSpin? |
| 01488 |
350 |
Yes, with included spacer |
| 01462 |
250 |
Please Email |
| 01936 |
305 |
Yes |
| 01938 |
300 |
Yes |
| 01940 |
350 |
Yes, with included spacer |
| Charnwood Model Number |
Swing (mm) |
Can I use the TriSpin? |
| W815 |
200 |
Please Email |
| W821 |
300 |
Yes |
| W813 |
310 |
Yes |
| Sheppach Model Number |
Swing (mm) |
Can I use the TriSpin? |
| DMS900 |
304 |
Yes |
| DMS1100 |
304 |
Yes |
Clarke
| Clarke Model Number |
Swing (mm) |
Can I use the TriSpin? |
| CWL 1000V |
350 |
Yes, with included spacer |
| Wiva Mac Model Number |
Swing (mm) |
Can I use the TriSpin? |
| 08801/802 |
520 |
Yes, with a spacer not included |
| 800 |
520 |
Yes, with a spacer not included |
| 1000 |
520 |
Yes, with a spacer not included |
| 1200 |
520 |
Yes, with a spacer not included |
| 6000 |
520 |
Yes, with a spacer not included |
| Hegner Model Number |
Swing (mm) |
Can I use the TriSpin? |
| HDB 1000 |
310 |
Yes |
| HDB 200 XL |
400 |
Yes, with included spacers |
|